DIN 6918
KARE KONTRÜKSÜYON PUL
Square taper washers for U-sections
UNI 5716
| Anma Ölçüsü | d | d min | d max | a | a min. | a max. | b | b min. | b max. | c | c max. | e | h | h min. | h max. | r | t | z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M12 | 13.00 | 13.00 | 13.43 | 26.00 | 24.00 | 28.00 | 30.00 | 29.35 | 30.65 | 1.60 | 1.90 | 3.70 | 4.90 | 3.90 | 5.90 | 2.00 | 0.70 | 1.68 |
| M16 | 17.00 | 17.00 | 17.23 | 32.00 | 29.50 | 34.50 | 36.00 | 35.20 | 36.80 | 1.60 | 1.90 | 4.45 | 5.90 | 4.90 | 6.90 | 2.40 | 0.80 | 2.00 |
| M20 | 21.00 | 21.00 | 21.52 | 40.00 | 37.50 | 42.50 | 44.00 | 43.20 | 44.80 | 2.00 | 2.50 | 5.25 | 7.00 | 5.80 | 8.20 | 2.80 | 0.90 | 2.00 |
| M22 | 23.00 | 23.00 | 23.52 | 44.00 | 41.50 | 56.50 | 50.00 | 49.20 | 50.80 | 2.00 | 2.50 | 6.00 | 8.00 | 6.80 | 9.20 | 3.20 | 1.00 | 2.00 |
| M24 | 25.00 | 25.00 | 25.52 | 56.00 | 53.00 | 59.00 | 56.00 | 55.05 | 56.95 | 2.00 | 2.50 | 6.26 | 8.50 | 7.30 | 9.70 | 3.20 | 1.00 | 3.80 |
| M24 | 25A | 25.00 | 25.52 | 56.00 | 53.00 | 59.00 | 56.00 | 55.05 | 56.95 | 2.00 | 2.50 | 6.25 | 7.65 | 6.45 | 8.85 | 3.88 | 1.00 | 3.80 |
| M27 | 28.00 | 28.00 | 28.52 | 56.00 | 53.00 | 59.00 | 56.00 | 55.05 | 56.95 | 2.50 | 3.00 | 6.26 | 8.50 | 7.30 | 9.70 | 3.20 | 1.00 | 3.80 |
| M27 | 28A | 28.00 | 28.52 | 56.00 | 53.00 | 59.00 | 56.00 | 55.05 | 56.95 | 2.50 | 3.00 | 6.25 | 7.65 | 6.45 | 8.85 | 3.88 | 1.00 | 3.80 |
| M30 | 31.00 | 31.00 | 32.00 | 62.00 | 59.00 | 65.00 | 62.00 | 61.05 | 62.95 | 2.50 | 3.00 | 6.52 | 9.00 | 7.80 | 10.20 | 3.20 | 1.00 | 3.80 |
| M30 | 31A | 31.00 | 32.00 | 62.00 | 59.00 | 65.00 | 62.00 | 61.05 | 62.95 | 2.50 | 3.00 | 6.50 | 8.05 | 6.85 | 9.25 | 3.96 | 1.00 | 3.80 |
| M36 | 37.00 | 37.00 | 38.00 | 68.00 | 65.00 | 71.00 | 68.00 | 97.05 | 68.95 | 3.00 | 3.50 | 6.68 | 9.40 | 8.20 | 10.60 | 3.20 | 1.00 | 3.80 |
| M36 | 37A | 37.00 | 38.00 | 68.00 | 65.00 | 71.00 | 68.00 | 67.05 | 68.95 | 3.00 | 3.50 | 7.00 | 8.70 | 7.50 | 9.90 | 4.24 | 1.00 | 3.80 |